USE :
Valve used to control the movement and blocking of the motor in both directions (DE)
creating the controlled movement of the load that does not slip away dragged by its own weight,
As the valve does not allow any cavitation of the engine.
The direct flanging, adopted for Donfoss motors of the OMP OMR series,
guarantees maximum safety, minimum pressure losses and compact installation.
MATERIALS AND FEATURES :
Body: galvanized steel.
Internal components: heat-hardened and ground steel.
Seals: BUNAN standard.
Tightness: negligible leakage.
Standard calibration: 320 Bar.
The valve setting must be at least 1.3 times higher than the pressure induced by the corium to allow the valve
to close even when subjected to the pressure corresponding to the maximum load.
ASSEMBLY :
Connect Vl and V2 to the power supply and flange
Cl and C2 directly to the engine.
BLOCK VALVE AND MOVEMENT CONTROL are interchangeable with:
